Maker Pro
Arduino

I Built an AI OS That Evolves on Demand

SS
October 27, 2026 by Sergey Sizov
 
Share
banner

S1-ADV is an experimental AI OS for Cardputer ADV. Features start with a request and pass through AI-assisted development, build, review and approved updates. The ESP32-S3 runs the interface and local tools; AI and builds run on a separate host.

I wanted a small computer whose next useful feature could begin with a request. S1-ADV is my experimental AI OS for the existing M5Stack Cardputer ADV: an interface and local tools on ESP32-S3, connected to AI and development tools on a separate host.


HOW A FEATURE EVOLVES

The intended workflow is a request, AI-assisted code, a build, review, an approved update, and a test on the real device. A request is not permission for uncontrolled reflashing. Firmware automation requires deliberate configuration and approvals. The film illustrates this interaction idea with real device footage and explanatory animation.


WHAT RUNS ON THE DEVICE

The Cardputer handles its keyboard, display, audio and local applications. Project tools include notes, a calculator, a focus timer and games. Local applications do not require the model merely to draw their interface. The firmware uses the Arduino/FreeRTOS environment; this is not Linux or a large language model running on the ESP32-S3.


WHAT RUNS ON THE HOST

A Node-based bridge connects the device to a separately configured OpenClaw host. Model access, speech services and optional firmware builds stay off-device. A configured provider may itself be remote. Gateway credentials belong on the host; device identity, tokens and topic permissions should be configured according to the repository security guidance.


SETUP AND CURRENT LIMITS

Use the current source documentation rather than a command copied from an old article. Initial setup requires a host and a USB data connection. Read the current getting-started, bridge and security instructions before flashing or configuring remote access. Wi-Fi credentials, device tokens and personally provisioned firmware should remain private.


This is an experimental software project on ready-made hardware, not an original open-hardware board or a validated beginner kit. Fresh-device provisioning of the public build remains to be validated. The film demonstrates my own setup; it does not establish clean-device reproduction, measured reliability, performance gains or compatibility with other Cardputer variants.


WATCH AND INSPECT THE SOURCE

Film: https://youtu.be/-eJ83SK7VHQ

Source, setup and limitations: https://github.com/s1z0v/s1-adv

Getting started: https://github.com/s1z0v/s1-adv/blob/main/docs/GETTING-STARTED.md


CREDITS AND DISCLOSURE

I am Sergey Sizov, the project maker. This article was prepared with AI assistance against project documentation. The cover is a real frame from IMG_3547.MOV, color-corrected without changing the device. M5Stack designed the hardware. S1-ADV builds on OmniBot by Naz Louis and its contributors. Preserve the source repository's component-specific licenses and credits: original project source is MIT, while the firmware-linked libmeshtastic-leaf is GPL-3.0-only. This is not a blanket MIT claim for every dependency.


I would welcome specific feedback on the device/host boundary and clarity of the setup instructions.


ARTICLE AND PHOTO LICENSE

CC BY 4+ applies to this original article and my real device photograph only. Source code, dependency licenses and third-party hardware rights remain as credited above.

Related Content

Comments


You May Also Like