J
john
- Jan 1, 1970
- 0
I want to create a probe to out in between two AA or AAAA cells to
detrmine the current flowing.
The probe could be made up of double-sided circuit board with a
wire coming from the contact area on each side.
All I see in the catalogues is 1.6mm thick PCD. Where can I get a
bit of thinner board?
TIA.
detrmine the current flowing.
The probe could be made up of double-sided circuit board with a
wire coming from the contact area on each side.
All I see in the catalogues is 1.6mm thick PCD. Where can I get a
bit of thinner board?
TIA.