led circuit wanted

[Pete]

is there anyone who can send me info for a simple circuit to drive a
highbrightness led from a 1.5 volt battery.thank you,pete

 

[gcd]

use 2 batteries in series and put a 22 ohm resistor in series with the LED.
that'll work fine

Cheers
Greg

 

[Robert Carter]

It depends on the led you are using. A white led would need three batteries in series and a 10-22 ohm resistor or an inverter to
operate off 1.5v. Look up the specs for the one you wish to use.
Rob.

is there anyone who can send me info for a simple circuit to drive a
highbrightness led from a 1.5 volt battery.thank you,pete

 

[Rob Judd]

is there anyone who can send me info for a simple circuit to drive a
highbrightness led from a 1.5 volt battery.thank you,pete

The resistor depends on the current it draws, but the basic circuit is:

LED Resistor | + 1.5v
______ |\|_______/\/\/\____| |_____
| |/| | | |
| | |
| |