Maker Pro
Maker Pro

mobile EFTPOS battery power supply

mark krawczuk

Dec 17, 2015
9
Joined
Dec 17, 2015
Messages
9
this is a eftpos charger from a vehicle. but looking at the input dc to the charger there is two seperate negatives... to the left you can see the red wire to charge sla battery , but the negative doesnt connect up to anything , just goes to the green power connector, can i just join both negatives together ?. i want to use it to power a low voltage led light.
 

Attachments

  • rsz_img_20191224_133034.jpg
    rsz_img_20191224_133034.jpg
    220.3 KB · Views: 4

Bluejets

Oct 5, 2014
6,942
Joined
Oct 5, 2014
Messages
6,942
might be a split supply.... +12v ..Common....-12v

What is on the other side of the board....?
What does the power in unit look like.....?
 
Top