T
The_Truth
- Jan 1, 1970
- 0
decoder page
http://www.hynix.com/eng/02_products/03_flash/down/NAND Flash.pdf
my 2 chips are
hynix HY27US08281A - TPCB *leadfree*
and
hynix HY27UA081G1M - TCB *not leadfree*
but I need to know if it is possible to do a swap of the HY27US for the
HY27UA
the only conflicts that might matter would be the
mode:
"1" (the UA)
"8" (the US)
and Die:
"S" (the US): SLC + Single Die + S/B
"A" (the UA): SLC + Double Die + S/B
I'm trying to take an external flash chip and use a "thumbdrive" as a
cheap flasher.
http://www.hynix.com/eng/02_products/03_flash/down/NAND Flash.pdf
my 2 chips are
hynix HY27US08281A - TPCB *leadfree*
and
hynix HY27UA081G1M - TCB *not leadfree*
but I need to know if it is possible to do a swap of the HY27US for the
HY27UA
the only conflicts that might matter would be the
mode:
"1" (the UA)
"8" (the US)
and Die:
"S" (the US): SLC + Single Die + S/B
"A" (the UA): SLC + Double Die + S/B
I'm trying to take an external flash chip and use a "thumbdrive" as a
cheap flasher.
