Newbie to OrCaD 10.5

[Boki]

Hi All,

I dont' know why, whatever I do, it alwasy says there is no circuit
http://photos1.blogger.com/blogger/1641/2018/1600/bjt.png
http://photos1.blogger.com/blogger/1641/2018/1600/cis.png


Could you please advice what should I do ?

Best regards,
Boki.

 

[Boki]

Boki 寫�：

Hi All,

I dont' know why, whatever I do, it alwasy says there is no circuit
http://photos1.blogger.com/blogger/1641/2018/1600/bjt.png
http://photos1.blogger.com/blogger/1641/2018/1600/cis.png


Could you please advice what should I do ?

Best regards,
Boki.

Here is the log information:
-------------------------------------------------
Creating PSpice Netlist
Writing PSpice Flat Netlist C:\Boki
Circuit\test-PSpiceFiles\SCHEMATIC1\SCHEMATIC1.net
WARNING [NET0093] No PSpiceTemplate for Q1, ignoring
PSpice netlist generation complete

 

[Charlie Edmondson]

Hi All,

I dont' know why, whatever I do, it alwasy says there is no circuit
http://photos1.blogger.com/blogger/1641/2018/1600/bjt.png
http://photos1.blogger.com/blogger/1641/2018/1600/cis.png


Could you please advice what should I do ?

Best regards,
Boki.

Boki, Boki, Boki...
You did normal error #3 - you used non-pspice symbols in a PSpice
simulation. The only parts you want to use are in the PSpice directory
in the libraries. All those others don't have simulation models or
other properties...

Charlie

 

[Boki]

Boki, Boki, Boki...
You did normal error #3 - you used non-pspice symbols in a PSpice
simulation. The only parts you want to use are in the PSpice directory
in the libraries. All those others don't have simulation models or
other properties...

Charlie

Soga... thank you very much.

Best regards,
Boki.