Not feeling the GiGa...

[gigawhawha]

Would greatly appreciate help with troubleshooting my Samsung Giga 3400w Sound System.
So I rewired the speakers with 16ga. performance series speaker wire from receiver all the way to the speaker still cutting out did wire test on speakers just to make sure I wired correctly getting 3ohms says that there 4ohms impedance.
I notice when I remove metal cover a section has like an over heat or light burn mark on it I have heard rite before cutting out like a pop noise right before it happens.
Cuts out at any volume .

Thanks in advance for any Suggestion advice or tips..

yours truly
Can't Live Without My Radio...

 

[bertus]

Hello,

Reading the description on this page : https://www.pdf-manuals.com/samsung-mx-hs9000-giga-sound-system-mx-hs9000-za-253111-manual
I can not get that a powerconsumption of 146 Watt can give 2600 Watt RMS output power.
This is NOT possible.

Bertus

 

[gigawhawha]

well thanks but not really helping..
you mite as well be speaking Dutch
have no idea what any of that means
just numbers to me but thanks anyway
Next........

 

[bertus]

Hello,

Yes, I am dutch, but realistic.
Take a picture of the dark spot you see and post it over here.

Bertus

 

[gigawhawha]

 

[bertus]

Hello,

And where was the black spot above?

Bertus

 

[davenn]

well thanks but not really helping..
you mite as well be speaking Dutch
have no idea what any of that means
just numbers to me but thanks anyway
Next........

It means that your amplifier CANNOT put out 2600W or anything remotely near that
another one of those bad advertising/marketing deceptions/scams

 

[davenn]

View attachment 49434

Yeah, definitely looks like a burn/smoke mark

So you need to show the circuit board etc that is sitting next to that area.
The smoke had to come from somewhere

ohhh and when you show the board etc a better sharper and well lit image would be great

 

[davenn]

Hello,

And where was the black spot above?

Bertus

kinda obvious

 

[gigawhawha]

 

[gigawhawha]

well just trying to get it to work at this point bad advertising or not
but i appreciate the help really

 

[gigawhawha]

 

[gigawhawha]

hope these are better pic for you guys

 

[gigawhawha]

Good Saturday Morning
Futher poking around discovered 3rd plate from the Left is over heating reaching temps
of 110 an higher only one thats getting that hot rest stay around 75 - 80 degrees
I can only imagine it's nothing good

 

[bertus]

Hello,

Is the temperature in Celcius or Fahrenheit?
When in Fahrenheit, the 110 would be about 43 degrees Celcius.
That would not worry me.
When it is 110 degrees Celcius, that would be bad.

Bertus

 

[gigawhawha]

that would be Fahrenheit sir..