PCB layout person - part-time/short-term - Brisbane

[[email protected]]

We require the services of an experienced PCB layout person to
participate in the design of a several microcontroller, A/D & D/A cards
we are currently developing.

Initially on part-time or short term contract basis.

Applicants should have experience in:

- Multi-layer
- Surface mount
- Design for automated manufacture
- EMC design issues
- Eagle and/or Protel DXP CAD software

Preference will be given to people able to periodically meet with the
design team in Brisbane though this is not a requirement.

Please apply via email to:

[email protected]

 

[The Real Andy]

We require the services of an experienced PCB layout person to
participate in the design of a several microcontroller, A/D & D/A cards
we are currently developing.

Initially on part-time or short term contract basis.

Applicants should have experience in:

- Multi-layer
- Surface mount
- Design for automated manufacture
- EMC design issues
- Eagle and/or Protel DXP CAD software

Preference will be given to people able to periodically meet with the
design team in Brisbane though this is not a requirement.

Please apply via email to:

[email protected]

I have Protel exp, multi layer surface mount, high volume production,
emc experience and automated design experience. My going rate used to
be about the $50/hour. And I live in Brisbane. I am willing to
negotiate.....I also have experience with high volume injection
moulding and prototyping. I did utilise QMI for some of that UV Resin
stereo lithography, as well as destructive low volume silicone plastic
moulding. Did you know that QUT does have the facilities for EMC
testing, for a very small price, much cheaper than certification.
Hmmmm, i am pissed, I do own a protel licence however. Bet you aint
serious....

 

[[email protected]]

I have Protel exp, multi layer surface mount, high volume production,
emc experience and automated design experience. My going rate used to
be about the $50/hour. And I live in Brisbane. I am willing to
negotiate.....I also have experience with high volume injection
moulding and prototyping. I did utilise QMI for some of that UV Resin
stereo lithography, as well as destructive low volume silicone plastic
moulding. Did you know that QUT does have the facilities for EMC
testing, for a very small price, much cheaper than certification.
Hmmmm, i am pissed, I do own a protel licence however. Bet you aint
serious....

Hi Andy,

Please drop me an email to ajs85t0fwgwb4zv at jetable.org so we can
discuss further details regarding this project.

 

[The Real Andy]

Hi Andy,

Please drop me an email to ajs85t0fwgwb4zv at jetable.org so we can
discuss further details regarding this project.

Shit, i forgot about this post. Whats a decent PCB draftsman cost now
days? I must have been pissed when I replied, $50/hour is a bit on the
cheap side these days I assume?

PS. IF you are desperate, you can email me at therealpearo at hotmail
dot com.