prosound pav-3000D

[Fdigooo]

hey i need help , i have prosound pav-3000D amplifier and i have lost the remote control of it .
my big problem is the loudness button , i just have it on the remote control and i dont have the loudness button in the amp .
any body knews how to make new button in the motherboard (solder) of that amp or any idea about a good remote control that have loudness button .. thnx

 

[Martaine2005]

Hi there,
I can't find any reference to that amp at all.
Is it a Pro-sound or prosound? ie Maplin. Is it a power amp or hi-fi amp?
Either way, are you sure you cannot access the loudness through the menu? (if it has one).

Martin

 

[Fdigooo]

It's written like that , Prosound pav-3000D , just from the remote i can their is no button on the amp for loudness thnx

 

[Martaine2005]

Hi, I can only find websites in Hebrew.
If you are willing to open it up, you could check the volume pot to see if has three terminals or a forth terminal opposite the three.
This forth terminal is set at 1/2 and has caps to boost signals. It's a loudness pot.
May be worth checking it out.

Martin

 

[Fdigooo]

ok i will check it right now thnx , and i will tell you what i wil find

 

[Fdigooo]

bro i have two cables togather , and three togather idk which one

 

[Fdigooo]

this is the all inside

 

[Fdigooo]

Hi this is the volume buttom i have 3 and 2 for light