S
Scott Wiper
- Jan 1, 1970
- 0
Their is a white wire that is labelled power good.
I would like to trick this supply into thinking it is fully on with out
useing a 1R 50watt resistor on the five volt line so I could just use the 12
volts with the switcher going into shut down. I have modded one with molex
connectors on the back for inserting power clips and banana plugs for my
solderless board.
If I take the power good to ground will this work like a ATX switcher where
the green is is taken to ground for PS_ON?
I would like to trick this supply into thinking it is fully on with out
useing a 1R 50watt resistor on the five volt line so I could just use the 12
volts with the switcher going into shut down. I have modded one with molex
connectors on the back for inserting power clips and banana plugs for my
solderless board.
If I take the power good to ground will this work like a ATX switcher where
the green is is taken to ground for PS_ON?