Maker Pro

Through-Hole and Surface Mount Technology- Comparison

September 29, 2022 by CIRCUITS DIY

In this article, we are going to discuss Through-Hole and Surface Mount Technology- Comparison


Printed circuit boards are vastly used for electronic devices. For the execution of electronic circuits, the designer chooses the best quality circuit board. So, to make the circuit secure and efficient, the designer uses printed circuit boards. But, before the invention of PCB end-to-end formation or point-to-point assembling was common. However, it was not effective and very unreliable. To make the circuits more efficient, designers took the idea of making PCB boards. Now, In today's electronics world of PCB, there are commonly two types of technologies used, surface mount technology, and through-hole technology. In this article, we'll do a comparison between them.

JLCPCB is the foremost PCB prototype & manufacturing company in china, providing us with the best service we have ever experienced regarding (Quality, Price Service & Time).

Through-Hole Technology

Through-hole was the technique that diminishes the point-to-point assembling method. It's a mounting strategy that uses the leads on the components that get inserted into the Printed circuit boards. These are the components that are soldered automatically by machines or manually by hand. Thus, the technique is usually used for heavier components. Moreover, this technique is favorable for the prototype PCB as it's inexpensive and reasonable.

Advantages of Through Hole

This technology builds a strong bond between the board and the components.

The board can carry and hold heavier and larger components.

It can resist environmental stress.

These kinds of boards can experience higher temperatures.

They are relatively durable.

Surface Mount Technology

Content goes here

Advantages of Surface Mount

It has a high assembly density, leading electronic devices to have less weight.

It contains high vibration resistance.

SMT keeps greater reliability and durability rate.

SMT has a high frequency that reduces electromagnetic and RF reduction.

It requires a fewer number of soldering points.

This technology saves the cost of the device.

Components of SMT and THT

SMT and THT have the main components that are described below:

  • Passive components: The most common examples of this are the resistors and the capacitor. However, they also contain coils. These are for the devices that require a significant amount of power
  • Transistors and Diodes: These are very small. Also, transistors have three legs, which makes them easy to solder.
  • Integrated Circuits: Integrated circuits are of different kinds. Some have 8 pins, some of having 14 pins, some have more than that, and some that have microprocessors can have 200 pins or more. SMT has reduced the size while giving them all the features and power that belong to them

Difference Between THT and SMT


SMT assembly is more reliable and efficient. On the other hand, requires knowledge of the whole process. Also, it has certain demands for the design phase. SMT makes productive and effective designs. But, additional drilling makes the board more expensive and less affordable. It can assemble more components in a smaller place. As a result, it saves money and reduces errors. So, we have concluded that PCBs are still it’s growing day by day. Both the surface mount technology and the through-hole technology of PCBs have their pros and cons.

Related Content


You May Also Like