Sounds good. Keep us posted....I've got a 15 or 20A in-line fused #10 wire coming off a distribution block to feed this unit. I'll see if I blow that one first. Thinking back to when this happened I hooked up the 12V and remote in properly, hit the reset button and nothing happened other than the power light coming on for 15 seconds or so. I'm going to try and get this done tomorrow afternoon.
Thanks,
Rick
If you don't get 12V at Terminal1, start back-tracking closer to the battery and let us know voltage before and after the 15 or 20A in-line fuse, and voltage at the battery. Ideally, they will all be the same.