Hi all,
I'm pretty new in this area, please don't shoot
I bought the following display:
Kingbright CA56-11GWA
The manual is here:
http://www.ges.cz/sheets/c/ca5611gwa.pdf
My question is how to connect it. From Dig 1, 2, 3 and 4 I see all the segments (from "a" to "g" plus the DP), but can't see the common pin. Also don't know which pins are for DP5 and DP6 (the dots between the numbers).
It's 2 x 18 pins. Which means 16 pins (one side) for all the segments, 1 for the DP in the middle and 1 for the common. Just don't know which pin is for what.
Thanks
I'm pretty new in this area, please don't shoot
I bought the following display:
Kingbright CA56-11GWA
The manual is here:
http://www.ges.cz/sheets/c/ca5611gwa.pdf
My question is how to connect it. From Dig 1, 2, 3 and 4 I see all the segments (from "a" to "g" plus the DP), but can't see the common pin. Also don't know which pins are for DP5 and DP6 (the dots between the numbers).
It's 2 x 18 pins. Which means 16 pins (one side) for all the segments, 1 for the DP in the middle and 1 for the common. Just don't know which pin is for what.
Thanks