Canadian PCB Suppliers, approx. 50 boards

[Kim]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

 

[John Smith]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or
silk
screening required.
Thanks,
Kim

Try [email protected] to see if they fit your needs. They are on the Left Coast
of Canada. Their Web page (if you can call it that) is http://www.1pcb.com/

If your traces are small (10 mils) they will use their Shanghai facility but
they might still get your boards to you in a week. Boards with larger traces
are made in Canada, I think.

My only connection with them is as a client.

John

 

[John Larkin]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

AP Circuits, Alberta I think. They just did a nice proto for us, about
as you describe, in 2 days. I don't think they've ever made a bad
board for us.

John

 

[Greg Neff]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

http://www.crestcircuit.com/crestmain.html

================================

Greg Neff
VP Engineering
*Microsym* Computers Inc.
[email protected]

 

[Frank Bemelman]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.

50 boards 3x3 inch double sided, 10 working days, 242.59 euro (~US$310)
including shipping. Including mask & silkscreen, routing.
www.eurocircuits.com,
see online calculator 'verified' to play with various options. Quality is
superb. I use them very often.

 

[Rob Paisley]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

---------------------

Two services that I have used with good results.

http://www.lktronics.com/

http://www.circuit-spec.com/

Rob.

------------------

 

[Gary Lecomte]

I am not a commerical manufacturer, But I could possibly do those
boards for you. However I would need to see some artwork first.

E-mails to me MUST CONTAIN the word "Electronic" in the Subject Line.

I could also do a Free Sample for you.

Take care......Gary
****************************************************************************