DSC-ADT5020 (Programming Map)

[Allan Waghalter]

Does anyone have a programming map for the ADT version of the DSC 5020?
Regards,
Allan Waghalter
Security Sure Alarm Company
[email protected]
713-771-8887

 

[Jim Rojas]

I don't think it differs that much from the standard 5020. I had one the
other day on my desk. Only thing I noticed is that when you default it,
you must then use the ADT installer code to gain access to programming.
Their default code can also be overwritten. I haven't tried to download
it yet.

Jim Rojas

 

[tourman]

I don't think it differs that much from the standard 5020. I had one the
other day on my desk. Only thing I noticed is that when you default it,
you must then use the ADT installer code to gain access to programming.
Their default code can also be overwritten. I haven't tried to download
it yet.

Jim Rojas

If it's anything like their 5010, it won't download without their
modified version of the DSC software. If you do try, keep us
posted.....

RHC

 

[Allan Waghalter]

No, It won't program without the ADT software.
Thanks for the input

 

[Allan Waghalter]

It appears that the locations are slightly out of normal positions from the
standard 5020.
Location that should contain the call back number has 1234.

 

[alarman]

It appears that the locations are slightly out of normal positions from
the standard 5020.
Location that should contain the call back number has 1234.

That could just be a programming error. I have seen ADT techs do some dumb
stuff.