OK here it goes...
Our new home was pre-wired for Paradox security system w/ a DGP-848 control panel, keypads and about 10 detector modules. I managed to successfully reset the master code by putting the jumper and entering programmable ares 950 (or was it 970? can't remember...). Anyhow, I must have unintentionally done something else to screw myself up and all the programming for the detector modules are gone!
I looked through all the stuff we received from the previous owner and the serial numbers for the detector modules were not written down anywhere. Is there a way to scan/discover all those serial numbers?
The control panel is able to scan/detect the serial numbers of all the keypad units but not the door/window units.
Will appreciate any tips from the experts.
Thanks in advance!
Our new home was pre-wired for Paradox security system w/ a DGP-848 control panel, keypads and about 10 detector modules. I managed to successfully reset the master code by putting the jumper and entering programmable ares 950 (or was it 970? can't remember...). Anyhow, I must have unintentionally done something else to screw myself up and all the programming for the detector modules are gone!
I looked through all the stuff we received from the previous owner and the serial numbers for the detector modules were not written down anywhere. Is there a way to scan/discover all those serial numbers?
The control panel is able to scan/detect the serial numbers of all the keypad units but not the door/window units.
Will appreciate any tips from the experts.
Thanks in advance!