Intermittent static when viewing cable, cable ready problem?

[[email protected]]

I swapped in a different tv. I did not carry the 31" downstairs. The
new set did not have any static at any time.

I tried what electricitym man suggested: reconnecting the old tv and
using the vcr tuner. And experienced 2+ days of no static whatsoever.
But the static has returned. To be very clear the connection is
wall-digital box-vcr (vcr on, vcr on vcr not tv, set to channel 4)-tv
channel 4. And I am using coaxial cable all the way trough. I believe
electricitym had intended that I use the composite output from the vcr
and bypass the tv's coax/tuner completely. I will do that as a last
resort but the tv is a bit older and only has coax and
s-video/composite inputs.

I will next try to open the unit and inspect grounds and soder joints.

I won't be able to get to it until sunday, thanks to everyone for their
input.
DC

 

[Mark]

if you know what the tuner looks like, and you are not an expert,
don't open the tuner...just squeeze the cover of the tuner a few times
and see if that fixes the problem for a few weeks,,, if it does then
you know you need to get a tech to open the tuner and clean the ground
contacts to the cover...


Mark

 

[Gene E. Bloch]

Damm that hurts doesn't it!....

It is definitely not fun. I've also gotten too close to spark plug
wires. That should be avoided too.

I guess if I had continued to make a habit of it, my nickname would be
Sparky instead of Gino

Sp...I mean Gino