Background, I have no knowledge of electronics but have a multi meter.
Radio was very occasionally turning off, I fiddled with the mains cable and usually came back on and good normally for a few weeks, so I though a dodgy cable. Recently is started again but would not stay on so took the mains cable out and put batteries in but the same happened so not the cable.
I cant see anything physically wrong ie loose cable or scorch marks, is there anything I could check using multi meter and possibly replace (I have soldering iron).
I would need instruction as have no electronics knowledge. Images attached.![3.jpg 3.jpg](https://maker.pro/forums/data/attachments/50/50614-94c824ccd914541b78f422f5bbd8c39c.jpg)
Radio was very occasionally turning off, I fiddled with the mains cable and usually came back on and good normally for a few weeks, so I though a dodgy cable. Recently is started again but would not stay on so took the mains cable out and put batteries in but the same happened so not the cable.
I cant see anything physically wrong ie loose cable or scorch marks, is there anything I could check using multi meter and possibly replace (I have soldering iron).
I would need instruction as have no electronics knowledge. Images attached.
![3.jpg 3.jpg](https://maker.pro/forums/data/attachments/50/50614-94c824ccd914541b78f422f5bbd8c39c.jpg)