Maker Pro
Maker Pro

MOSFET identification.

Martaine2005

May 12, 2015
4,960
Joined
May 12, 2015
Messages
4,960
Hi guys and gals, as per the description, can anybody identify it?
Thanks in advance
PS, it’s from a cordless 20V max drill.


Martin
 

Attachments

  • 145d85b0-d4c2-46cd-96ca-313e0f07ed0e.jpeg
    145d85b0-d4c2-46cd-96ca-313e0f07ed0e.jpeg
    283.2 KB · Views: 14

bertus

Moderator
Nov 8, 2019
3,381
Joined
Nov 8, 2019
Messages
3,381
hello,

looking at the picture i see irfp30
this is what alldatasheet shows:
it could be an irfp3006 or irfp3077

bertus
 

Martaine2005

May 12, 2015
4,960
Joined
May 12, 2015
Messages
4,960
Definitely not 3077.
The 30 is obviously correct but I can’t fathom the last two.
I’ll check those out and probably just over rate it as I’m not bean counting. It’s a customer repair that Makita don’t supply these components, although I can buy the heat sink and pozi screw! What a joke.
 

Martaine2005

May 12, 2015
4,960
Joined
May 12, 2015
Messages
4,960
Hi @bertus ,
You were spot on!.
A new new controller arrived today and the MOSFET is a 3006.
Now I’ll order one to repair the other.
Thank you.
 
Top