C
Curbie
- Jan 1, 1970
- 0
I'm looking for some web-site(s) that a list of links to Solar panel &
inverter spec sheets.
Any ideas?
Thanks,
Curbie
inverter spec sheets.
Any ideas?
Thanks,
Curbie
Curbie said:I'm looking for some web-site(s) that a list of links to Solar panel &
inverter spec sheets.
Any ideas?
Thanks, I got the Out Back inverter spec-sheet and it was just what INorthern Arizona wind and sun http://www.windsun.com/
has panel specs and probably some inverter specs. www.outbackpower.com has
OB specs. Personally I've found the OB inverters to be underrated.
Curbie said:Hi Ulysses,
Thanks, I got the Out Back inverter spec-sheet and it was just what I
was looking for, also got the spec-sheet for Trace, do you
use/recommend OB, any other recommendations beside OB or Trace?
Curbie said:Hi Ulysses,
Thanks, I got the Out Back inverter spec-sheet and it was just what I
was looking for, also got the spec-sheet for Trace, do you
use/recommend OB, any other recommendations beside OB or Trace?
Thanks,
Curbie
Ulysses,
Thanks for all your help and time, assessments from users are at least
as value to me as the spec-sheets. The only other recommendation I've
found so far is from the OtherPower board (Kipoint), but I'm still
searching the boards.
Thanks,
Curbie
The SW4024 seems to be a discontinued unit, if I interpret Trace'sI've used a pair of Trace (now Xantrex) SW4024s for nearly 14 years.
Very happy, particularly since they've stood up to serious use with
heavy loads like welding. They have the same basic issues with
charging as Ulysses mentioned, and I mostly use a DC charging setup
for the same reason. The built-in chargers are nice to have though,
even if it's just for backup to the backup. They're automatic and make
backup charging a more streamlined operation than a DC charger.
For what reasons?If I was buying today I'd be giving preference to the Outback line
so long as I could get some verification that they could stand hard
use like the Trace units.
n Thu, 25 Jun 2009 12:59:12 -0400, Curbie <[email protected]>
wrote:
I've used a pair of Trace (now Xantrex) SW4024s for nearly 14 years.
Very happy, particularly since they've stood up to serious use with
heavy loads like welding. They have the same basic issues with
charging as Ulysses mentioned, and I mostly use a DC charging setup
for the same reason. The built-in chargers are nice to have though,
even if it's just for backup to the backup. They're automatic and make
backup charging a more streamlined operation than a DC charger. > Wayne
It figures, I just spent two days putting an inverter datainverter spec sheets.
Richardson said:You see Curbie is insulted by your good intention. Eeyore, you're not a
total idiot at time, but Curbie thinks he knows better than you. That's
why he ignores your recommendation, he wants to follow other idiots who
taught him about PMA generator/motor.