Maker Pro
Maker Pro

Zenith board#9-2003

J

Jonesy82

Jan 1, 1970
0
hi all ;
working on this Zenith with a 9-2003 board problem HOT 1167-01 shorted and
cx3231 burnted out would like to know the value of cx3231 it burnted so bad
can'nt make it out? and ? what could cause this problem? i would think it
may be the flyback, since the HOT was blowed . Thanks in advance.
 
If you want someone to actually try and look this up, you need to post
all the important information, just a chassis number or board is not
usually enough. Need full model number along with boards and possibly
year of manufacture.
 
Jonesy82 said:
hi all ;
working on this Zenith with a 9-2003 board problem HOT 1167-01 shorted and
cx3231 burnted out would like to know the value of cx3231 it burnted so bad
can'nt make it out? and ? what could cause this problem? i would think it
may be the flyback, since the HOT was blowed . Thanks in advance.

CX3231 560 pf @ 2KV

Common problem, they just burn up. IHVT is probably OK.

David, on the Illinois prairie.
 
Top