Need to rotate image 180 degrees in camera - Can this be done?

[[email protected]]

I have a loaner (my dome camera is waiting to be replaced) Ganz camera
(I think that it is a CS) that is mounted from a ceiling grid mount.
Hence, the image on my DVR is upside down. There is no mount point on
the top of the camera, and I cannot rotate the image with my dvr
software. Is there some way to rotate the image within the camera?

Any help would be appreciated.

 

[Frank Olson]

I have a loaner (my dome camera is waiting to be replaced) Ganz camera
(I think that it is a CS) that is mounted from a ceiling grid mount.
Hence, the image on my DVR is upside down. There is no mount point on
the top of the camera, and I cannot rotate the image with my dvr
software. Is there some way to rotate the image within the camera?

Any help would be appreciated.

Hmmm... If this was a board camera, it would be fairly easy to turn 180
degrees. Have you got a link to a website where I can see the model of
camera you've got?

 

[[email protected]]

It is the YC Series:

http://www.cbcamerica.com/cctvprod/ganz/cams/csmount/csindex.html

It has a phase adjustment that I have not played with - I was doubtful
that this would do it...

 

[Jon Aichberger]

why not get off the keyboard and get a ladder, go to the camera and turn it
180 degrees. surelly it would take only about 5 minutes

 

[Frank Olson]

It is the YC Series:

http://www.cbcamerica.com/cctvprod/ganz/cams/csmount/csindex.html

It has a phase adjustment that I have not played with - I was doubtful
that this would do it...

You're going to either have to find a mounting bracket/housing for it or
make one yourself. There's no way to access the "innards", unfortunately.

 

[@@]

Those two little holes on top of the camera are for remounting the bracket
on top. I use these cameras almost exclusively in my facility. Great
picture, modest price, love 'em!

Will