B
bart
- Jan 1, 1970
- 0
Hello all, I am looking to transmit a 66MHz clock signal over a 50ft
length of 50ohm coax. I am considering using a Texas Instruments
TB5D1, which is capable of driving 50 ohm loads, but I am unsure as to
what the max switching frequency vs length of cable is for PECL. I
would appreciate any comments or suggestions as well. Thanks in
advance.
length of 50ohm coax. I am considering using a Texas Instruments
TB5D1, which is capable of driving 50 ohm loads, but I am unsure as to
what the max switching frequency vs length of cable is for PECL. I
would appreciate any comments or suggestions as well. Thanks in
advance.