C
Craig
- Jan 1, 1970
- 0
I have a PWM motor controller that has a 10K pot to adjust the speed.
I have removed the pot and am wanting to use a 0-5 vdc analog signal
to change the speed. Hooked up the 0-5 vdc signal in place of the pot
and the control is backwards i.e. 0 = 100% and 5 = 0%.
What could I add to change this?
I have removed the pot and am wanting to use a 0-5 vdc analog signal
to change the speed. Hooked up the 0-5 vdc signal in place of the pot
and the control is backwards i.e. 0 = 100% and 5 = 0%.
What could I add to change this?