Jonnystuart
- Sep 16, 2017
- 3
- Joined
- Sep 16, 2017
- Messages
- 3
Hi.
Was wondering if anyone could shed any light on this as I've rang a few electricians in my area and no one seems to know how to install a ring doorbell off the mains without an existing doorbell in place. My aim is to get all the information and get my usual electrician to do the install.
Ill need to purchase a transformer (probably this http://www.screwfix.com/p/british-general-8-24v-8a-bell-transformer-module/8707p) this will sit in the consumer unit in the garage. I believe I also need a resistor for between the transformer and the doorbell as per these instructions https://support.ring.com/hc/en-us/a...-Transformer-Without-a-Pre-existing-Doorbell- (probably this https://www.amazon.co.uk/gp/aw/d/B0...d+Resistor&dpPl=1&dpID=415aRCUbjuL&ref=plSrch).
Now the question is how does it all go together?
TIA
Was wondering if anyone could shed any light on this as I've rang a few electricians in my area and no one seems to know how to install a ring doorbell off the mains without an existing doorbell in place. My aim is to get all the information and get my usual electrician to do the install.
Ill need to purchase a transformer (probably this http://www.screwfix.com/p/british-general-8-24v-8a-bell-transformer-module/8707p) this will sit in the consumer unit in the garage. I believe I also need a resistor for between the transformer and the doorbell as per these instructions https://support.ring.com/hc/en-us/a...-Transformer-Without-a-Pre-existing-Doorbell- (probably this https://www.amazon.co.uk/gp/aw/d/B0...d+Resistor&dpPl=1&dpID=415aRCUbjuL&ref=plSrch).
Now the question is how does it all go together?
TIA