If you want to. It probably doesn't matter much, but if you wanted to re-measure some, just do these:
5) the right lead of the 22Ω resistor (which is below LC7881), which should be the same as 3) above,
6) the left lead of the 22Ω resistor in 5) above.
To ensure you are measuring the 22Ω resistor, this is the red-red-black one that is just below the row of C101 green capacitors and just to the right of the 2 electrolytic capacitors. My instruction were not all that clear when I read them again. Thanks.
yes you were right I did measure the wrong resistor. I measured the resistor that was just bellow pin 1 of LC7881 (which I have circled green in the attached photo)
When I measured the resistor that the yellow arrow points to I got
One odd the I did notice is when I was kind of poking around with my finger my finger touched the first resistor I measured ( the green circle ) and I believe at the same time it had contact with pin 1 of LC7881 (due to them being so close) and the keyboard was making music (due to the demo button being engaged) and it wasn't 100% clear and loud, but it was the most i have heard out of it since it has broke. Does that mean anything?