Maker Pro
Maker Pro

help with IR2110 chips

Maglatron

Jul 12, 2023
1,452
Joined
Jul 12, 2023
Messages
1,452
I found the equation used before
2 x pi x 7 / 2.5. I thought you were using a different wheel from the one in the pic.
okay divide circumfrence by pi then half: 50 / 3.14 = diameter then half for 7.96cm radius thanks
 

Alec_t

Jul 7, 2015
3,589
Joined
Jul 7, 2015
Messages
3,589
It's actually a tad more than 50cm circumference, because the magnet diameter is a chord rather than an arc.
 

Maglatron

Jul 12, 2023
1,452
Joined
Jul 12, 2023
Messages
1,452
ok so taking that into consideration? I am considering a strait 8cm radius to the centre should be fine!!
 
Last edited:
Top