It's 8" block wall with fully grouted cells and rebar. The door will be
mostly concealed including the hinges (dunno how but the guy is loaded so if
there is such a thing he will buy it). There won't be any visible door knob
or hardware so I think prying th door outward, even with only a 600lb mag
lock will be pretty darn difficult. Also, the perp will have to pass at
least 3 layers of an ADT alarm system to get to where the room is.
Yah ADT beat me to the remodel...but given they've already had 3 false
alarms since we've been there so dunno how long that relationship will last.
I met with the sheriff today and I asked him what zone ADT dispatched on and
he said they didn't give him any info...just the alarm dispatch...weird...we
always dispatch with a zone description. Ah well.
I hate prewiring for another company, but I am anyway. I know my prices are
more reasonable then their's would be.
|
| "Robert L Bass" wrote in message
|
| > > I doubt though that a screwdriver could pry opened (towards you) a
600lb
| mag
| > > lock...I've tried blasting against one that opened away and couldn't
do
| it
| > > with my massive super strength
| >
| > I forced a 600-lb lock open with my shoulder once and I'm only of
| > average strength -- not exactly a weight lifter.
|
| I think everyone here has already made that assumption
|
| > If there's a wall or
| > other rigid, parallel structure nearby, a strong man could open
| > the door using leg pressure.
|
| Not when the door swings outward. Please read and understand the OP post
| before you grace us with your vast knowledge.
|
| >It's surprising the amount of
| > pressure even an average adult can deliver in a leg press.
|
| This coming from not exactly a weight lifter by his own admission.
|
| > Consider the leverage of a 12" long screwdriver with 1/2"
|
| You sure like that fraction. Didn't we hear the same thing about a drill
bit
| just recently.
|
| > inserted into the space between the door and the frame. There's
| > a 23/1 mechanical advantage.
|
| The force would be downward, not outward, with only a 1/2" insertion on 1
| 3/4" door. The best the perp could expect is to take a chunk out of the
door
| and only if the shank of the screwdriver didn't bend upward first.
|
| > The thief only has to apply about
| > 30-35 lbs of force. Note: If it were linear motion the figure
| > would be just over 26 pounds, but the screwdriver is describing a
| > circular arc so the required force in a tangential direction
| > increases somewhat.
|
| Have to break out the old slide rule for that line of BS there, Robert?
| >
| > If the door opens away from the lock it's even easier
|
| Have you ever seen a door open into the lock? BAHAHAHAHAHA....Do you know
| how to spell Door Stop?? Stop Robert...I can't take it any more...I am LOL
| until my side hurts. Why don't you drop the 4 online stores and do Stand
Up?
| I don't think people would pay but you are hilarious.
|
| -- take a
| > run and hit it with your shoulder. I weigh just over 200 pounds.
|
| BAHAHAHAHAHA....just?......just?
|
| > At a 15 mph sprint that's more than enough force to pop a 600-lb
| > lock.
|
| Lets think about this for kicks and giggles. A safe room is probably...
what
| 6'X8'? Maybe 8'X10'? and you want someone to get to a 15mph sprint in that
| distance. Riiiightttt! And why should they do this? To get out? Remember
the
| door swings out. All they have to do is hit the rex button. Why take a
| chance on injuring their shoulder? Next, a perp could take a 15mph run,
| which is questionable inside any structure, at it and if the door is
| installed properly, with or without a mag of any size most likely will
| bounce off the door and land on his ass. Why, because, again Robert, the
| door swings outward.
| Your propensity to quickly jump in and cast your opinions vastly
outweights
| your understanding of what you read. Your so easy, but keep it coming, if
| for nothing more than kicks and giggles.
|
| With a 1200 pound lock it would be significantly harder to
| > pop.
|
| Astute observation
|
| > If you use an 1800 pound lock the required force would
| > destroy the door before the magnet would give way.
|
| Brilliant
|
| >Most folks
| > will part with a few extra dollars if they can see a significant
| > advantage in the hardware.
|
| As presented by RLB.
|
|
|